PRODUCTS

GREEN BLADE SKIN

Green Blade Skin

Green Blade ® Skin is a decorative multi-substrate sheet coating solution on thin adhesive, available in all our colors. The product is available in sheets of 60 x 250 cm and 117 x 250 cm with a horizontal fiber orientation (over 60 cm). The installation is very simple, just remove the protective film, and stick the coating on your support.

» Click to download the product sheet

  • Contributes to the recycling and responsible recovery of agricultural waste.
  • Contributes to the diversification of exports and the circular economy of Martinique.
  • Reduces the use of exotic gasoline with uncertain traceability.
  • Limits the use of chemicals commonly used in the wood industry for use in design and decoration.

Porto Rico

porto rico

Saint Barth

ST barth

Martinique

martinique

Havana

havana

Grenada

grenada

Dominica

dominica

Barbados

barbados

Bahamas

bahamas

Aruba

aruba 1

Anguilla

anguilla
Composition 100% banana «trunk» fiber Martinique (France)
Substrates FCS non-woven + kraft + ADM
E136 double sided adhesive
European Union

 

CHARACTERISTICS GREEN BLADE®
SUSTAINABLE Natural, Wood Free, Recycled material, Bio-degradable
COMPOSITION 100% sliced European banana available on FSC woven backer
DIMENSIONS 600x2500cm (1,96×8,53pi) ou 1170x2500cm (3,93×8,53pi)
THICKNESS 0,35mm
BENDING 90 ° radius of 1.5mm
GLUE TO USE Special non-woven wallpaper glue
SUPPORT Partition wall, drywall and concrete, on a dry and clean surface. Do not use in damp rooms.
CLEANSING Dry or slightly damp cloth
FINITION 27μ protective overlay, matte finish
GRAIN ORIENTATION Horizontal (on 600 or 1170mm)
TRANSLUCENCE 50%
CERTIFICATIONS LEED certification (7 points in 3 categories) and FSC for backings
C02 EMISSIONS 0,05 CO2eq/ kg
VOC EMISSIONS Low

Clean the support with a cleaning or degreasing product.


Separate part of the veneer sheet from the backing that protects the self-adhesive side.


Apply the sticker, then continue to remove the backing that protects the adhesive side while applying the Green Blade Skin.

Smooth the adhesive with a cloth or roller.

Green Blade® and the environment Fibandco takes great pride in offering sustainable, high-performance products. All Green Blade® products use our plant based veneer from recycled banana plant trunks. Fibandco recycle the trunk (or stem) of the plant once the fruit has been harvested. After bearing fruit, the banana plant naturally dies, for a new plant to grow from the bulb. Hence Fibandco give a second life to a by-product of banana farming. No water is used in the manufacturing of Green Blade®, and the Fibandco factory produces the energy it uses thorough solar photovoltaic panels.

All panels used to make Green Blade® products are FSC certified. The Forest Stewardship Council is an international not for-profit, multi-stakeholder organization established in 1993 to promote responsible management of the world’s forests.
Green Blade could contribute positively to LEED credits

MATERIALS & RESOURCES

MRc 4 Recycled content (2 points)
Green Blade is 100% recycled banana trunk
MRc 5.1 & 5.2 Regional materials (1-2 points)
The final assembly location determines the opportunity for these credits.
MRc 6 Rapidly renewable materials (1 point)
Banana trunk renews every 9 months after each banana bench harvesting.
MRc. 7 Certified wood (1 point)
FIBANDCO use certified FSC and PEFC companies for panels production.

INDOOR ENVIRONMENT QUALITY

EQc 4.1 Low-emitting materials – adhesives and sealants (1 point)
FIBANDCO uses low-VOC glues for all products.
EQc 4.2 Low-emitting materials – paints and coatings (1point)
Lambri uses low-VOC finishes for all products.
EQc 4.3 Low-emitting materials – composite wood and agrifiber products (1 point)
FIBANDCO products can be produced with low VOC and/ or no added urea formaldehyde (NAUF) substrates.

Products certified to European and French standards
Green Blade could contribute positively toBREEAM guidelines
Hea 02 Indoor air quality
Mat 01 Life cycle impacts
Mat 03 Responsible sourcing of materials
Most of Green Blade panels products are classified A+ (French VOC emission certification)