Green Blade ® Original is a wall coating solution in strip on adhesive foam support, available in all our packages. Declined in strip 119 x 15 cm with an orientation vertical of fiber (119 cm). The installation is very simple, just remove the protective film and stick the strip on the wall without it.
| Composition | 100% banana «trunk» fiber | Martinique (France) |
| Substrates | FCS non-woven + kraft + ADM E136 double sided adhesive |
European Union |
| CHARACTERISTICS | GREEN BLADE® |
| SUSTAINABLE | Natural, Wood Free, Recycled material, Bio-degradable |
| COMPOSITION | 100% European Banana trunk sliced available on a non-woven backer or Kraft impregnated paper both FSC certified, designed in France |
| DIMENSIONS | 1190x150mm (3.9×0.49pi) or other dimensions on request |
| THICKNESS | 2.1mm |
| BENDING | Minimum radius 20cm |
| SUPPORT | Partition wall, drywall and concrete, on a dry and clean surface. Do not use in damp rooms. |
| CLEANSING | Dry or slightly damp cloth |
| FINITION | 27μ protective overlay, matte finish |
| GRAIN ORIENTATION | Vertical (on 1190mm) |
| TRANSLUCENCE | 0% |
| CERTIFICATIONS | LEED certification (7 points in 3 categories) and FSC for backings |
| C02 EMISSIONS | 0,05 CO2eq/ kg |
| VOC EMISSIONS | Low |
Start by making a level line 150mm from the lowest point of the wall.
Lay the first plank along the line, starting from one end.
Lay the second plank of the row, coming against the first, edge to edge and following the level line. Cut out the last blade with the utility knife and square, in several passes.
Once the first row is finished, cut and glue the boards under the first row, by shifting the joint of at least 30cm compared to the one above.
Proceed in this way for the entire surface to be produced. Take care to stagger the joints. Apply a dry cloth to the whole thing when finished.
Green Blade® and the environment Fibandco takes great pride in offering sustainable, high-performance products. All Green Blade® products use our plant based veneer from recycled banana plant trunks. Fibandco recycle the trunk (or stem) of the plant once the fruit has been harvested. After bearing fruit, the banana plant naturally dies, for a new plant to grow from the bulb. Hence Fibandco give a second life to a by-product of banana farming. No water is used in the manufacturing of Green Blade®, and the Fibandco factory produces the energy it uses thorough solar photovoltaic panels.
 |
All panels used to make Green Blade® products are FSC certified. The Forest Stewardship Council is an international not for-profit, multi-stakeholder organization established in 1993 to promote responsible management of the world’s forests. |
 |
Green Blade could contribute positively to LEED credits
MATERIALS & RESOURCES MRc 4 Recycled content (2 points) INDOOR ENVIRONMENT QUALITY EQc 4.1 Low-emitting materials – adhesives and sealants (1 point) |
 |
Products certified to European and French standards |
 |
Green Blade could contribute positively toBREEAM guidelines Hea 02 Indoor air quality Mat 01 Life cycle impacts Mat 03 Responsible sourcing of materials |
 |
Most of Green Blade panels products are classified A+ (French VOC emission certification) |
